dmesg
显示Linux系统启动信息
补充说明
dmesg命令 被用于检查和控制内核的环形缓冲区。kernel会将开机信息存储在ring buffer中。您若是开机时来不及查看信息，可利用dmesg来查看。开机信息保存在/var/log/dmesg文件里。
语法
1dmesg(选项)
选项
1-c：显示信息后，清除ring buffer中的内容；
2-s<缓冲区大小>：预设置为8196，刚好等于ring buffer的大小；
3-n：设置记录信息的层级。
实例
1[root@localhost ~]# dmesg | head
2Linux version 2.6.18-348.6.1.el5 (mockbuild@builder17.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue May 21 15:34:22 EDT 2013
3BIOS-provided physical RAM map:
4 BIOS-e820: 0000000000010000 - 000000000009f400 (usable)
5 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
6 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
7 BIOS-e820: 0000000000100000 - 000000007f590000 (usable)
8 BIOS-e820: 000000007f590000 - 000000007f5e3000 (ACPI NVS)
9 BIOS-e820: 000000007f5e3000 - 000000007f5f0000 (ACPI data)
10 BIOS-e820: 000000007f5f0000 - 000000007f600000 (reserved)
11 BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved)
查看硬盘基础信息
1dmesg | grep sda
2
3[ 2.442555] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
4[ 2.442590] sd 0:0:0:0: [sda] Write Protect is off
5[ 2.442592] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
6[ 2.442607] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
7[ 2.447533] sda: sda1
8[ 2.448503] sd 0:0:0:0: [sda] Attached SCSI disk
查看多关键字
1dmesg | grep -E "vcc5v0_host|vcc_3v3_s0|ttyS"
2
3[ 1.193143] vcc5v0_host: supplied by vcc5v0_usb
4[ 1.481139] feb80000.serial: ttyS5 at MMIO 0xfeb80000 (irq = 73, base_baud = 1500000) is a 16550A
5[ 1.513541] vcc_3v3_s0: supplied by vcc5v0_sys
来源：https://github.com/jaywcjlove/linux-command
最后修改于： Wednesday, January 31, 2024
版权申明:
- 未标注来源的内容全部为原创，未经授权请勿转载（因转载后排版往往错乱、内容不可控、无法持续更新等）;
- 非营利为目的，演绎本博客任何内容，请以'原文出处'或者'参考链接'等方式给出本站相关网页地址(方便读者)。